..:: Setool latest update v1.088::..

[saotome]

Download Link:
Your a guest, please login or Register to see this link

[saotome]

setool2 v0.91380093

"thieves" release.

- added IMEI change patch for db2020 cid49/51 phones.

alas, but universalbugz released IMEI change patch for db2020, 
and because of that i forced to release same on setool2. 
of course, setool2 solution has nothing common with universalbugz 
way (i even not know yet how they making their patch)
and developed by myself in educational purposes long-long time ago.

please be certain, that you can use IMEI patch on own phone only for 
educational purposes,otherwise you breaking law and blablabla.

note, that it is NOT IMEI repair (security zone repair), but PATCH.
it will NOT repair red blink phones and can only be executed 
on 100% working phones.
if you flash main (update on seus) - OLD IMEI will be restored.

patch is working on all recent DB2020 firmwares.
i have no idea and can't guarantee that it will work on new firmwares.
(well, i CAN guarantee that it will NOT work ;) )


now, howto. 
well, you already know how, if you ever tried 
(of course, for educational purposes only) IMEI change for 
db2000/2010 models.

in short - you have 2 ways.

first way:
1. select model, on settings check "use altbypass","use server",
"allow IMEI change when unlocking","patch otp<>gdfs check in firmware"
2. on semc tab press unlock. 
phone will be unlocked and you will be asked for new IMEI. cost - 1 credit.

second way:
1. select model, on settings check "use altbypass","use server",
"allow IMEI change when unlocking","patch otp<>gdfs check in firmware",
"unlock after flash"
2. on semc tab, select main,fsimage,custpack. press flash.
phone will be flashed, customized, unlocked and 
you will be asked for new IMEI. same, 1 credit.

part 1, 2, 3

[saotome]

part 4,5 & 6

[saotome]

part 7,8, dan 9

[saotome]

part 10, 11, 12 finish

[saotome]

setool2 v0.91380094

- finally i got P1 phone and so - P1 support added.
  supported flashing,gdfs read/write,usercode read. 
  unlocking supported via special server (read: not supported)
- by request, during flashing phone on semc tab,
   file in misc. edit now can be script or package.
- other bugfixes and bugs.

current P1i firmwares available on support.

Your a guest, please login or Register to see this link

File ini masih punya log setool tinggal 3 kredit orang yang upload file ini tidak tau kalo log setool nya masuk ke sini juga, filenya anda bisa cek setool2.ini

[saotome]

3 kredit yang ada di account tersebut sudah ludes.

[emycell]

3 kredit yang ada di account tersebut sudah ludes.

kacian ya bos ?????
buah dari kecerobohan,

[saotome]

setool2 v0.91380095

SEMC end release.

-  added FREE db2020/pnx5230/db2012/PDA
   custpack uploading/gdfs read/write/userlock operations.
   you need CHECK use server (fill any login details) for it.
   if you WILL CHECK "use alternative security bypass",
   you WILL need credits.
   note - cid49/cid51 UNLOCKING via flash patch still requires credits.

ps.
**** to idiots, who called themself griffin team.
if anybody not understands, language changing and flashing now FREE4ALL.

Your a guest, please login or Register to see this link

thanks setool team the_laser

[saotome]

Indonesian:

- Gratis db2020/pnx5230/db2012/PDA
  Pengoperasian custpack uploading/gdfs read/write/userlock.
  Anda mesti pilih "use server" (masukkan username dan password) untuk
  menggunakannya.
  Jika anda pilih "use server" harus pilih juga "use alternative security bypass",
  Anda mesti memakai kredit.
  catatan: cid49/cid51 unlock operator gsm melalui flash patch tetap menggunakan
  kredit.

[saotome]

unlock usercode/phonecode ---> gratis
flash db2020 cid52 ----> gratis

[saotome]

setool2 v0.91380096

thieves release #2.

- added IMEI change via patch for cid50/51 db2012 phones.
  howto:
  select needed model.
  on settings, mark "use server","use alternative bypass",
  "alllow IMEI change when unlocking","patch OTP<>GDFS check"
  press UNLOCK, enter desired IMEI.
  patch requires 1 credit.

  note, that is FLASH PATCH, so it IMEI will change to original
  if you flash main part of firmware.

ps.
go-go-go, unibugz. steal it properly.

news update lagi pusing dah

[saotome]

Your a guest, please login or Register to see this link

bagi yang susah donlot di support area tersebut boleh donlot filenya di rapidshare links

[saotome]

the empire strikes back

special servers are open to all.

Q: How to PERMANENT unlock from network DB2020/DB2012/DB2001/PNX5230 phone ?

A:
first, download latest version, v0.91380096/UNI will do job just fine.

select USB as interface. that is REQUIRED.
select phone model
settings - check "use server for csca unlock/flash", "do full unlock instead of usercode reset", fill your login details.

back to semc tab, press unlock, attach phone with pressed "C" buttons.

if you have enough credits - you will receive next message
"SIGNATURE QUEUED FOR CALCULATION, CHECK BACK LATER"

(that means signature is added to calculation queue. calculation can take up to 3 days.
if after 3 days (72 hours) signature will NOT be calculated - credits will be automatically returned
when you press "info" or add another phone to queue.)

(if you receive next message "QUEUE FULL, CHECK BACK LATER",
that means all slots for calculations filled up and you need try again later)

now - leave that phone aside for some time and check back periodically
(NOT each 5 min , but each 60 min )

if signature is calculated - you will receive 'SUCCESS' response, otherwise you will receive
"%YOUR_IMEI% ALREADY IN QUEUE" - that means signature is in calculation queue.

if calculation is success, then signature will be saved in backup\%imei% folder in your setool2 directory.

next, backup will be created so you will be able to restore phone if something will go wrong
(hardly believe, but who knows...)

next, you will be prompted to detach phone and turn it on.
do so.
detach phone.
turn it on FULLY
phone will be on 5 locks, that is normal.
connect phone to usb.
if phone will ask you switch to phone mode - switch to phone mode.
it can ask you for drivers,if you not installed them previously.
install all needed phone drivers (phones.rar on support area)
be SURE that you install all drivers correctly.
press "testpoint ok"

note: in latest setool2 version phone will be searched constantly on all
available comports until it will be found. So, you not need to press "TESTPOINT OK"

procedure will continue,phone will be switched off and unlocked.

remember, if something will go wrong - you have a backup of security units.

cost of DB2020 unlock is 10 credits. it divided into 2 steps:
signature calculation 6 credits (charged once), phone unlock - 4 credits
(charged once, if by accident, server is recharging while you executing unlock, credits NOT charged)

as usual, credits will NOT be recovered in case of connection failures. (error 10054,10060).
that is NOT terms for discussion.

NOTE! there is STILL REMAIN USERCODE RESET FOR DB2020/DB2012/PNX5230.

it will work, if you UNCHECK option "do full unlock instead of usercode reset" and press UNLOCK.

note: i STRONGLY recommend you to instal PHONE drivers BEFORE starting unlock procedure.

from first letter till last letter, repeating infinite times, until you understand topic completely.

in short - cid52/cid53/pnx5230 full permanent unlocking are back to public.

update:

v0.91380096/UNI IS latest official version. 
all other not released (leaked beta) versions can crash your pc, 
forever damage your phone and drive you really mad ;)
you have been warned.

once again.
calculation can take up to 72 hours.
that is not real-time service.
sometime,though, it is almost realtime ;)

[winjl]

- SEMC A2 phones support added.
currently supported : flashing, gdfs read/write, scripting, userlock reset.
standalone, no server needed. network unlock will be added later (via server)
RED,BROWN phone domains supported.
only DCU60 interface supported.

new script commands:
taread:AAAABBBB
read TA unit (former gdfs), where AAAA= partition number, BBBB - unit
tawrite:AAAABBBBDDDD....
write TA unit (former gdfs), where AAAA= partition number, BBBB - unit,
DDDD.... data

note, that script command "readfile:" not supported by retail loader.
usually phone nicely works with dcu60 when attaching it with "C" button,
but there is some really old protos, which requires "2+5" buttons
(you should not meet such).

note, THAT YOU SHOULD USE CUSTOMIZE PACKAGE, "complete" option not works

- a lot of GUI updates,like increased profiles number for each phone model,
IMEIs in queue, etc,etc.
- a lot of many other things, so there should be bugs. hunt them and report
in beta-testing thread.
- added latest SEMC USBFLash (working with all phones) and PDA drivers.

- that release in mainly bug hunting release, planning add some
cheap phones support soon (well, at least flashing ).

[winjl]

- fixed MAJOR bug, which prevents almost all operations from work.
(unlock by patch, cid49 operations, etc).

- fixed .vkp script processing

- added "complete phone" support for a2 phones.
it writing generic custpack with all languages enabled.
for PROPER complete - please use "normal" custpacks.

- still more bugs ? hunt them

[saotome]

v0.914009/UNI 

- fixed slow phone search when doing second part of CSCA unlock
- fixed "can't open port err:006" after gdfs read
- several gui bugs fixed.
- still more bugs ? hunt them ;)



important.

i got two reports that a2 phones after flash go to infamous 5lock state.
it is some bug in semc firmwares, because to solve that "locks after flashing",
you need just power circle your phone.

[saotome]

Your a guest, please login or Register to see this link

[winjl]

v0.914012/UNI

- gdfs commands for A2 phones was broken in script processing. fixed.
- added experimental flashing support for j110/j120/k200/k220 phones
(currently works flash,flash read,eeprom read)
- added experimental k200/k220 seczone repair (simlock remover)
select k200/k220 model and press unlock to execute it.
note. experimental. so pretty please use eeprom backup option.
- still more bugs ? hunt them

ps.
j110/j120/k200/k220 flashes will be uploaded asap...

[ab media]

Minta link donlot bos....soalnya setiap donlot lewat supportnya forbidden mulu nich...????
plz....
Thanks...