MXKEY [MxKey Team HTI PLUS Flasher Interface 2], SN: C0602C99
Using device: USB Phonet and HTI, FW ver: 00.50, SN: 0100301A
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: nmwcdc, ver: 7.1.32.75
Module ver: 1.0.0.21151(13-07-2012), Library ver: 1.0.0.14214(25-10-2012)
Battery voltage: 3852 mV
Waiting for USB device removal ...OK
Waiting for USB device arrival ...OK
Make sure USB cable, Battery and charger are removed from device.
Insert USB cable, Battery back to device(make sure to have fully charged battery).
Insert Charger or Press phone's power button(if flashing doesnt start automatically)
Waiting for USB ROM device ...
Device synchronized.
CPU: XGOLD 213
Using embedded SBL from MCU.
Sending EBL Loader...OK
Sending EBL ...OK
Getting EBL Version ...
Boot mode: 0xCC
EBL version major/minor: 10.47
EBL version: Quantum_Bootloader_10.47_M1S1
Protocol version suggested by phone: 3
Set baud rate to: 6.50 Mbit/s
Flash ID: 00EC 3012 - 23280002 [Samsung ]
CFI information:
Flash settings: 0/1024, size: 0x04000000
1 Block regions:
512 x 0x00020000 = 0x04000000
EBL ready !
Original IMEI: 35326405xxxxx2
IMEI_DATA saved OK
CCC_DATA saved OK
HWC_DATA saved OK
LOCK120_DATA saved OK
RPL saved to "C:\mobileEx\3.5\data\backup\XGOLD_3532640xxxxxx2_ back.RPL"
Processing file: 1902E4DA_rm834__20.28.mcusw
Downloading item CODE:rm834__20.28.mcusw_ebl_psi.fls, num block: 4, size: 28 MB
Erasing area 0x40000000-0x4001FFFE ...OK
Programming completed in 0.343 s
Erasing area 0x40040000-0x4005FFFE ...OK
Programming completed in 0.359 s
Erasing area 0x40060000-0x4015FFFE ...OK
Programming completed in 1.485 s
Erasing area 0x40280000-0x41D3FFFE ...OK
Programming completed in 35.656 s
Checksum verified (0xF07A)
Processing file: 0515D332_rm834__20.28.ppm_x
Downloading item CUST: package_x.ppm_ebl_psi.fls, num block: 1, size: 5.31 MB
Erasing area 0x41DC0000-0x4230EAF6 ...OK
Programming completed in 7.906 s
Checksum verified (0x389C)
Processing file: 90E28172_rm834__20.28.image_x_059M6H8
Downloading item CUST: package_x_059M6H8.image.fls, num block: 1, size: 12.25 MB
Erasing area 0x424C0000-0x43E1FFFE ...OK
Programming completed in 15.953 s
Checksum verified (0x9726)
Total time for flashing process(boot+erase+write) was 3 min 50.344 s
Waiting for USB device removal ...OK
Waiting for USB device arrival ...
Waiting for device boot up ...
Device connected: nmwcdc\Nokia USB Phonet, PORT_ID: 214D7F6C
Verifying communication to device OK.



Phone type: RM-834 (202)
Software version: V 20.28 22-03-12 RM-834 (c) Nokia
Imei plain: 35326405xxxxxx-2
Product code: 059N1M0
Battery voltage: 3852 mV, current: 186 mA
Cellular system: GSM
ASIC ID: 0x0000, type: 11
Ppm Id: X
Language Pack:
- not available.

Master code: 4206524757
Camera config: 0A350160006015, ver:

Imei net: 3532640xxxxxx2
Version: SIMLOCK SERVER
Provider: GSM Test Operator
Counter: 0/3, 0/10

CONFIG_DATA: 0010100000000000
PROFILE_BITS: 800000000003000B

BLOCK1: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK2: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK3: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK4: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK5: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK6: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
BLOCK7: 1=OPEN, 2=OPEN, 3=OPEN, 4=OPEN, 5=OPEN
FULL FACTORY... OK
USER DATA... OK
LEAVE FACTORY... OK
SERVICE CENTER... OK
SOFTWARE UPGRADE... OK
PRODUCTION TUNING... OK
Reset User Code (to default:12345) ... OK
Completed in 0.110 s