Software Pulsa Tiger Engine
Iklan disini

advertisement   advertisement   advertisement

Page 1 of 2 12 LastLast
Results 1 to 20 of 32

Cyclone BOMB - Read UNLOCK Codes for Lumia, No TP, No BF, No Patch, Perm Unlock !!!

This is a discussion on Cyclone BOMB - Read UNLOCK Codes for Lumia, No TP, No BF, No Patch, Perm Unlock !!! within the Cyclonebox forums, part of the Repair Box & Dongle category; !!! INSTALLER v1.06 !!! (fixed DCT4 and some other critical bugs) DOWNLOAD LINK 1 DOWNLOAD LINK 2 br CycloneBox Team...

  1. #1
    Moderator DUNIACELL's Avatar
    Join Date
    Mar 2009
    Location
    TANGERANG,BANTEN. 2a4a3440
    Posts
    602
    Thanks
    108
    Thanked 695 Times in 159 Posts
    Rep Power
    13

    Default Cyclone BOMB - Read UNLOCK Codes for Lumia, No TP, No BF, No Patch, Perm Unlock !!!

    !!! INSTALLER v1.06 !!!

    (fixed DCT4 and some other critical bugs)


    DOWNLOAD LINK 1
    DOWNLOAD LINK 2




    br
    CycloneBox Team
    Last edited by sadermo; 11th December 2012 at 08:03. Reason: edit topik

  2. The Following 2 Users Say Thank You to DUNIACELL For This Useful Post:


  3. Asisten VRE
    Kiswara Modem
  4. #2
    Full Member kacell's Avatar
    Join Date
    Nov 2006
    Location
    pacitan city
    Posts
    86
    Thanks
    46
    Thanked 70 Times in 19 Posts
    Rep Power
    8

    Default Cyclone EVOLUTION ! Added FREE Clip Mode, Added FREE Infineon XGold Flashing & More..

    Hi to all
    New Cyclone Box Installer, Firmware, Bootloader, is ready!
    Most important changes:

    =====================
    Installer v1.07
    30.06.2010
    =====================

    - New FBUS Loaders v10.18.00 introduced (new protocol, for RAPIDO,RAPU,ST,etc)
    - New FBUS Lodaers v10.16.00 introduced (old protocol, for RAPv3)
    - Added support for Infineon X-Gold phones flashing. Phones supported: 1661 RH-111, RH-125, etc.
    - XGold: Support for dead phones flashing
    - XGold: Support for cross flash (we have tested 1616 flashing with 1800 firmware and seems works. Anyway YOU are responsible for any damages. Make sure PM is being backed-up before cross-flash. You also can't flash phones with difrent platform (i.e. RH111 <> RH125). Too diffrent CPU, LCD...,etc...)
    - XGold: Supports bauds 115200,230400,460800,921600
    - XGold: You don't need to know which phone is UPP or Infineon based. Just select model and Cyclone will detect it automaticly - wil select corect falshing method.
    - XGold: Supports for changing phone PPM/CNT or/and MCU
    - XGold: Support for latest 2010 PBL/EBL Loaders
    - Added "Flash Language Only" checkbox for DCT4/XGold mobiles. Use only if MCU version installed in phone matches PPM/CNT version which going to be flashed.
    - Cyclone Clip Diagnostic module added. This is used for testing additional Cyclone Hardware (Clip).
    - Clip Module Added into Main Firmware. This is used only with "Cyclone Clip" hardware. Clip Features:
    - Clip: Can unlock any DCT4+ phone within 2 secs (without PC)
    - Clip: Can repair Contact Service (if caused by damaged simlock)
    - Clip: Can Rebuild Simlock Area
    - Clip: Can reset security code of most DCT4/BB5 phones
    - Clip: Can reset security code bad attempts counter of most DCT4/BB5 phones
    - Clip: 100% Safe, fast and easy to use
    - You need have Clip Hardware to use Clip Funcionality. Clip is very simple hardware attached together with batery to Diagnostic Port (and box could be used as clip without PC). We will update clip later for other funcionality.
    - New Secure Bootloader Agent v3.00 Released
    - Added Dead Boot Recovery mode (in case to do "Boot Recovery" (just in case) smartcard MUST be removed to launch Recovery Mode!)
    - New Secure Bootloader v2.12 have been released
    - Bootloader: Added Clip Detection
    - Bootloader: Fixed floating (blinking) "VBAT" port
    - Bootloader: Added support for some new types of smartcard
    - Bootloader: Improved startup time
    - Bootloader: Improved security
    - Bootloader: Minor changes and bugfixes
    - Added new messages to NCK Phone Respond parsing (added "Too fast between tries" and "Not locked on given locklevel")
    - The +4/5/6/7 BB5 NCK passwords are now calculated correctly (memory leak during code calculation)
    - Message "This will consume XX credits" removed while taking DCT4 RPL as long as they are free .
    - Blackberry IMEI Check fixed
    - Added "Skip CMT ID Check" for some BB5 phones (if you are trying to flash alien files or NMP made some mistake during building FIASCO images)
    - Added Warning confirmation before Writing Alien SD Keys
    - Error while RSA unlocking DCT4 phones fixed (Error 0x02). Error have occured when used bad cable.
    - Main Firmware v01.41 Released
    - Box Hardware Rev A11E Added
    - Minor changes and bugfixes

    How to run "Clip Mode"?
    1. Attach Clip Adapter to box "Diagnostic Port"
    2. Connect Clip Adapter "USB" cable to box USB Input
    3. Connect 9V battery to Clip Adapter
    4. Connect phone to "Service Port"

    How to use "Clip Mode"?
    Once Clip Mode is run, you need use S1 Button to change it's mode.
    Default clip mode is:
    RED (slowly blinking) - read phone info via FBUS
    other modes you can select pressing S1 button:
    GREEN - Unlock/Repair simlock
    BLUE - reset securitycode/sec.code attempts

    Once correct mode is assigned, you need push S2 button. Needed action will be taken, and GREEEN (success) or RED(failed) led will blink fast afterall. Clip will be ready to service next phone/select other mode/etc.

    Maybe some movie, how to use it?
    Youtube: YouTube - Cyclone Box used as Clip with latest addon

    Where to get clip hardware?
    You can ask any of Cyclone Box distributor/reseller.
    Hardware is relative cheap - 15 usd (end-user price).
    We will update clip soon with other functions.
    It's first official Cyclone Addon.
    Keep note it is CYCLONE ADDON, and same Clip Adaptor - it's just adaptor and still Cyclone Box is needed to work!

    Where from download?
    http://rapidshare.com/files/40431702...aller.exe.html
    Please don't forget to upgrade box using new EXE file. New firmware v01.41 is needed to run latest Application.

    Best Regards,
    Stay Tuned,
    Cyclone Team

  5. The Following User Says Thank You to kacell For This Useful Post:


  6. #3
    Full Member sloww56's Avatar
    Join Date
    Nov 2009
    Location
    WONOSARI, GunungKidul
    Posts
    285
    Thanks
    90
    Thanked 581 Times in 132 Posts
    Rep Power
    10

    Default Re: Cyclone EVOLUTION ! Added FREE Clip Mode, Added FREE Infineon XGold Flashing & More..

    nice share booss...


  7. #4
    Full Member kacell's Avatar
    Join Date
    Nov 2006
    Location
    pacitan city
    Posts
    86
    Thanks
    46
    Thanked 70 Times in 19 Posts
    Rep Power
    8

    Thumbs up Cyclone Box Firmware v01.42 Released

    Hi, new Cyclone Firmware is uploaded on server.

    - Fixed particular problems with handling new loaders (10.18.00), however if you still having problems with flashing phones using new protocol no need to make headache - we though about it and left old protocols untouched, so in case just make bugreport in our subsection and meanwhile you can flash your unit by ticking "Use Old Protocol Loaders".
    - Minor changes and bugfixes

    Every box have 3 update credits, please be patient during upgrade.
    No need to upgrade EXE - bug was inside box fimware, not in EXE, so just use Box Maintenance and upgrade box microcode.

    Best Regards,
    Cyclone Team

  8. #5
    Full Member kacell's Avatar
    Join Date
    Nov 2006
    Location
    pacitan city
    Posts
    86
    Thanks
    46
    Thanked 70 Times in 19 Posts
    Rep Power
    8

    Thumbs up Cyclone Box Firmware v01.43 Released

    Hi, New firmware v01.43 is uploaded to server

    - Fixed "Smartcard is not responding for reset" in some configurations. Thanks TouTouGSM for reporting and helping in removing this problem. (GSM-Forum - View Single Post - cyclone card dead after upgrade to latest version)

    Please upgrade your box only if you are encountering Smartcard problems, else no upgrade is needed.

    Don't need to upgrade exe if you have installed latest installer (released on 01.07.2010), else install this installer to have backward Nokia Loaders compatibilty. To upgrade just go to "Box Maintenance" and use Maintenace to write latest microcode.

    As always,every box having 3 update credits. Please WAIT PATIENTLY during upgrade as it will end (else your box will not be upgraded, and credits will be charged, you will need to ask us agian, etc, etc - so just click BOX MAINTENANCE and patiently WAIT!).

    During upgrade you may see message like "Cant upgrade bootloader", "Not allowed to upgrade bootloader", "Bootloader upgrade skipped". THIS IS VERY NORMAL becuase BOOTLOADER SHOULD BE UPDATED ONLY ONCE to minimise risk of destroying your box. As you know bootloader is first code executed upon box bootup, so when its corrupt/destroyd box is bricked. So if your bootloader is already up to date you will receive such message, but that means everything is just fine.

    Another things which need attention is usage latest firmware and latest NK loaders.
    Keep note that firmwares >=v01.42 need have installed Nokia loaders 10.18.00 (latest installer update). Else you will encounter booting and flashing problems - firmware >=01.42 is not compatible with 0.9.50 loaders !!! So if you don't installed latest installer BUT upgraded Firmware to >=v01.42 YOU WILL ENCOUNTER NOKIA BB5 FLASHING PROBLEMS!

    Just sticky with this rules and enjoy Cyclone

    Best Regards,
    Cyclone Team

    aa-pulsajaya

  9. #6
    Full Member engkok sinogo's Avatar
    Join Date
    Dec 2008
    Location
    delanggu ngetan sitik
    Posts
    228
    Thanks
    53
    Thanked 117 Times in 39 Posts
    Rep Power
    7

    Default Re: Cyclone Box Firmware v01.43 Released

    translate donk.................g mudeng q maklum g sekolah

    udah update lg ya cyclone mantap

  10. #7
    Full Member kacell's Avatar
    Join Date
    Nov 2006
    Location
    pacitan city
    Posts
    86
    Thanks
    46
    Thanked 70 Times in 19 Posts
    Rep Power
    8

    Thumbs up Cyclone NEVER SLEEP Installer v1.08 - New FBUS Loaders v10.20.1, Firmware v01.45...

    Hi, that's is right time
    New Cyclone Installer,Firmware,Loaders are avaiable.

    What's new?
    =====================
    Installer v1.08
    06.07.2010
    =====================
    - Added new Nokia FBUS Loaders for Old and New protocols (v10.20.0)
    - Fixed problems with flashing RAPIDO based phones with hash 479.... (N86,X6). Was Nokia fault (10.18.0 loader pack was broken, probably problem with RSA signature so loader wasn't spawned at all...)
    - Fixed problem with FUR initialization when dealing with v10 (2010) Nokia Loaders (Affected was new protocol phones)
    - Forced users to install v1.08 changing few firmware routines - some users upgraded their boxes updating it for "v10" loaders, but they didn't installed new installer - their BB5 flashing was broken then. Forcing users to install v1.08 and upgrade box is just to ensure every user will have 100% working environment (latest loaders, latest firmware, latest exe).
    - New Box Firmware v1.45 Released
    - Handling some smartcards in main firmware fixed
    - Minor changes and bugfixes

    Where to download?
    RapidShare: 1-CLICK Web hosting - Easy Filehosting

    Don't forget to upgrade your box firmware to v01.45 !

    Best Regards,
    Stay Tuned,
    Cyclone Team


    trasletnya

    Hi, itu benar waktu
    New Cyclone Installer, Firmware, Loader adalah avaiable.

    Apa yang baru?
    =====================
    Installer v1.08
    2010/07/06
    =====================
    - Ditambahkan baru Nokia FBUS Loader untuk protokol Lama dan Baru (v10.20.0)
    - Tetap masalah dengan flashing ponsel berbasis Rapido dengan hash 479 .... (N86, X6). Apakah kesalahan Nokia (10.18.0 pak loader rusak, mungkin masalah dengan tanda tangan RSA sehingga loader tidak memijah pada semua ...)
    - Tetap masalah dengan inisialisasi Fur ketika berhadapan dengan v10 (2010) Nokia Loader (Terkena adalah protokol telepon baru)
    - Dipaksa pengguna menginstal firmware v1.08 mengubah rutinitas beberapa - beberapa pengguna upgrade kotak mereka memperbarui itu untuk "v10" loader, tetapi mereka tidak diinstal installer baru - BB5 mereka berkedip rusak itu. Memaksa pengguna untuk menginstal v1.08 dan kotak upgrade hanya untuk memastikan setiap pengguna akan memiliki 100% lingkungan kerja (loader terbaru, firmware terbaru, exe terbaru).
    - New Box Firmware v1.45 Rilis
    - Penanganan beberapa smartcards di firmware utama tetap
    - Minor perubahan dan perbaikan bug

    Dimana download?
    RapidShare: 1-KLIK Web hosting - Mudah filehosting

    Jangan lupa untuk meng-upgrade firmware komputer anda untuk v01.45!

  11. #8
    Moderator DUNIACELL's Avatar
    Join Date
    Mar 2009
    Location
    TANGERANG,BANTEN. 2a4a3440
    Posts
    602
    Thanks
    108
    Thanked 695 Times in 159 Posts
    Rep Power
    13

    Thumbs up Cyclone Box Installer v1.09 Released, SL3 Unlocking Added, New FBUS Loaders, and more

    Hi!
    New update for Cyclone Box is Ready.

    What's new?

    =====================
    Installer v1.09
    02.08.2010
    =====================


    - New BB5 Loaders v10.22.00 Introduced
    - SL3 Unlocking added, uses server and credits, supported models:

    - 2700 Classic (RM-561)
    - 2730 Classic (RM-57
    - 2730c-1b (RM-579)
    - 2690c (RM-635)
    - 3600 Slide (RM-352) v56.26 v57.23
    - 3720 Classic (RM-51
    - 5130 XpressMusic (RM-495)
    - 5310 XpressMusic (RM-303) v58.58 v59.42
    - 5730s (RM-465)
    - 6300 (RM-217) v57.20
    - 6303 Classic (RM-443)
    - 6500 Slide (RM-240) v59.60
    - 6500 Classic (RM-265) v59.45
    - N97 (RM-505/506/507)
    - N97 mini (RM-555)

    - When using New Protocol flashing, software reminds about correct TX2 cable and yellow adapter
    - Added Manual Mode to retrieve SL3 NCK if you dont have phone in hand (just enter IMEI when asked)
    - Added "Erase NCK Codes" - this should be used when phones needs to be factory-relocked (best to use with SL3 if you want to clear entered NCK codes). Work with SL2 too. Simlock area is untouched when Relocking to factory state, and warranty will still be ok. Seems first software on market with such funcionality.
    - Fixed BlackBerry calculation problems, old version never closed TCP connection after success or non-success calculation
    - Firmware v1.46 Released, Added SL3 Routines
    - Minor changes and bugfixes


    Example SL3 unlocked by new update

    Code:
    BB5 Unlock Started...
    MCU Version V 07.95
    MCU Date 03-02-10
    Product RM-495
    Manufacturer (c) Nokia
    IMEI 351538045311523
    Mastercode 4612735731
    Simlock Server SIMLOCK SERVER
    Simlock Key 2600300000000000
    Simlock Profile 8000000000000000
    Simlock Key Cnt 0
    Simlock FBUS Cnt 0
    Simlock [1,1] State: CLOSED Type: MCC-MNC Data: 26003F
    Connecting to Cyclone Server...
    Cyclone Server (1.0.0.632), Cyclone Box Team 2008, 2009, 2010 - Ready.
    Checking job status...
    Code Ready, Code: #pw+966057384237461+7#
    Sending code via FBUS...
    NCK[7] - ACCEPTED
    Code Accepted! Unlocking Finished!
    Rapidshare Download LINK
    Direct LINK1
    Direct LINK2




    NOTE
    A firmware upgrade to v1.46 is needed to use this update!

    Stay tuned,
    Best Regards,
    Cyclone Team

  12. #9
    Super Moderator sadermo's Avatar
    Join Date
    May 2009
    Location
    ◄repair boot/dead boot►
    Posts
    2,081
    Thanks
    449
    Thanked 2,113 Times in 621 Posts
    Rep Power
    29

    Default Cyclone Box Installer v1.10 FBUS2USB, TurboCache, Infineon XGold Imei, Loaders & more

    CYCLONE TEAM

    proudly presents
    Cyclone Box Installer v1.10

    What's new?

    - Infineon XGold IMEI Backup/Restore added (First in the world)
    - New BB5 FBUS/USB Loaders v10.34.1 introduced
    - BB5 USB Flashing module rewritten, supports new Flashing Type: FUR USB - using FBUS loaders on USB. Is possible now to do also RPL write, Cert's read/write/erase, using just USB cable. Full FBUS protocol emulation over USB supported!
    - FBUS2USB RAPU Support
    - FBUS2USB RAP4 Support
    - FBUS2USB Broadcomm Support
    - Broadcomm platform flashing added (Nokia X2,....)
    - 6700,E52 and other RAPunistore Booting fixed (Wrong First Char Received)
    - SL3 Simlock RPL Write Introduced
    - DCT4/BB5 Flash TurboCache added, increasing flashing speed a bit
    - The Profile Bits is now analyzed before SL3 Unlock (it will not submit job if phone have blocked NCK unlocking - i.e. Telcel Mexico units)
    - New NCK unlocking method for SL2 phones introduced (with latest MCU Software versions)
    - Added Autologging (operation logs are stored in StoredFiles)
    - Added USB Full RPL Backup (NPC,CCC,HWC,Simlock,WMDRM,etc)
    - Added StatusBar in Nokia Tool, displaying current Task/Mobile attached
    - DCC Camera Repair added for module NI00BC0000030102F201
    - DCC Camera Repair added for module ISL3TI0200000C000002
    - DCC Camera Repair added for module IS00TI0200000C208A03
    - DCC Camera Repair added for module IS00TI02000001022B04
    - DCC Camera Repair added for module 86000300010401022B04
    - DCC Camera Repair added for module 8600030001040C208A03
    - DCC Camera Repair added for module 86L10300010406260004
    - DCC Camera Repair added for module 86L10300010406260000
    - DCC Camera Repair added for module 86L103000104094C1003
    - Refactorized GUI thread problems
    - Improved stability of Blackberry calculator
    - Improved flashing speed with Skins Enabled
    - Added detailed Action Statusbar

    We are not finish yet so
    Here we Go again



    - Added CBUS StatusBar, indicates "---->" on USB Transmit, "<----" on USB Receive, Idle and Errors
    - Support area is rebuilt - file list parsing is optimized
    - "Connection Closed Gracefully" in Support Area fixed
    - Connection recovery in SupportArea added
    - Fixed "Floating Point Divison by zero" in Support Area
    - Entered NCK codes are now backed-up too upon Simlock Backup
    - New progressbar introduced in Nokia Tool gui
    - Improved USB SwitchToRaw
    - Improved ADL Server Pooling
    - Improved USB Phone Pooling
    - USB BootRom detect routine rebuilt
    - Fixed "Access Violation" while application exit
    - Fixed Registration Tool bug when "Submit" button is not shown after Box Prepare
    - Fixed bug when software after minimizing to tray don't appears at taskbar
    - Added "KB Left", "Time Left", "Current Speed" real-time information while downloading files from support
    - The Germany Server is now default Support Server
    - Added support for Box Hardware Revisions B, thus is A11F, B110, B111 and B112, and other B11x
    - Old "INI" File Parser Module added (for Old DCT4 phones)
    - Old "INI" File parser Module added (for Old BB5 phones)
    - Added support for 6630,6680,N70 ini parser (DPConverted v1-v2 VPL files)
    - The product name is now resolved at Product List (i.e. RM-1 (6630))
    - Auto-select flashfiles added (selects product and variants on Read Phone)
    - The new method of BB5 NCK Calculation is now the default Unlock Method for BB5 mobiles. For SL3 use SL3 Online Code Calculation.
    - "Abort" button added, this terminating all threads (during flash, erase, unlock, whatever)
    - Skin Manager updated to v7.02, much stable and faster
    - Fixed box hangup problem when PC goes to sleep mode
    - During SL3 Check/Submit job, phone is readen first, then server transaction starts (to not overload server resources)
    - Failed to Process Initial Challenge (2) during Bootloader Upgrade fixed
    - During SL3 Submit Job software now try first to read PM 120 and detect if phone is SL3
    - Small changes regarding SL3 Submit Job - should work bit smoother right now with bad cables
    - Updated message about SL3 Credit consumption
    - Added bigger delay between entering NCK codes (bruteforce protection)
    - Fixed "Canvas does not allow drawing" while SL3 Manual Mode
    - Cyclone Secure Bootloader v2.13 Released
    - Cyclone Main Firmware v01.49 Released
    - Cyclone Calculator v1.00 added into installer
    - Cyclone USB Drivers Updated to 1.0.0.5
    - Connectivity Cable drivers updated to 7.1.34.0
    - Minor changes and bugfixes



    How to update?
    1. Uninstall old installer
    2. Download new installer
    3. Install it
    4. Upgrade box firmware
    5. Enjoy

    Where to download?
    LINK 1
    LINK 2


    Thanks for all who support us! Thx Moulnisky, PTT, Honey, arash, & others...

    Best Regards,
    Cyclone Team

  13. The Following User Says Thank You to sadermo For This Useful Post:

    dic

  14. #10
    Super Moderator sadermo's Avatar
    Join Date
    May 2009
    Location
    ◄repair boot/dead boot►
    Posts
    2,081
    Thanks
    449
    Thanked 2,113 Times in 621 Posts
    Rep Power
    29

    Default Re: Update.! Cyclone News n Installers

    makin mantabs cyclone...
    udah ada tombol "ABORT"


  15. #11
    Moderator DUNIACELL's Avatar
    Join Date
    Mar 2009
    Location
    TANGERANG,BANTEN. 2a4a3440
    Posts
    602
    Thanks
    108
    Thanked 695 Times in 159 Posts
    Rep Power
    13

    Thumbs up Cyclone DEMOLITION! XGold1 Unlock/RPL, XGold2 Flash/RPL, W7 64bit, New log2cod, more.

    Installer v1.11 is Ready.

    What's new ?
    =====================
    Installer v1.11
    07.03.2011

    =====================

    * New BB5 FBUS/USB Loaders v10.48.1 introduced
    * DCT4/BB5 Product/Variant caching added. Saves lot of time when selecting correct Datapackage. This is done automaticcly. During Deletion or Installing some of DP, cache is rebuilt automatically on user demand.
    * XGold2 USB Flashing Introduced (C1-01,C1-02,C2-00,...)
    * Added XGold2 RPL Backup (including CCC,HWC,NPC,Simlock) FIRST in the world. The backup is created automatically during flash.
    * Added XGold2 RPL Write (CCC,HWC,NPC and Simlock) seems FIRST in the world. In order to write RPL file, you need flash your phone and add RPL file as secondary flashing Image (Add XGold2 RPL button).
    * XGold2 RPL Contains FULL phone security, possible to Full restore after Flash Chip change
    * Added XGold1 Unlocking by Reading LOG2COD Log file
    * Added XGold1 Low-Level PM Dumping (both Secured and Nonsecured areas), seems 1st in world
    * Added XGold1 Low-Level RPL Backup, seems 1st in world
    * XGold1 Backed-up RPL file might be used to completly Re-Initialize phone security, i.e. after flash-chip change (RPL Contains IMEI and Simlock Block), seems 1st in world...
    * Both XGold1 Low Level dumps support dead phones (phone might be dead, Cyclone will binary dump PM from flash chip directly)
    * Added XGold1 Low-Level Deleted PM Keys dumping (extra option-don't write back readen PM file with deleted keys, they are ASCII marked as deleted ones). Support deleted messages, contacts, ..., seems 1st in world
    * Added XGold1 FBUS/Keyboard SL Bad Entries Counter reset, seems 1st in world
    * Reading XGOLD1 LOG2COD is fully standalone, seems 1st in world
    * XGold1 Unlock/RPL supported mobiles: 1616, 1280, 1208, 1209, 1800, C1-00, and others...
    * Added "Mapped At" FlashChip information during XGold Flashing, when possible
    * Added "Sector Size" FlashChip information during XGold Flashing, when possible
    * No reboot flashing for XGold added
    * APE block flashing fixed for various RAPIDO mobiles
    * Fixed Old Protocol (Dead) USB Flashing (RAPIDO phones: N86,etc)
    * Fixed Blackberry Module upon reading MEP via USB it was placing it on wrong window
    * Assigned COD files are now verified before sending to server, the auxiliary verification also takes place at Server Side
    * Fixed OpenDialog filter when adding DCT4/BB5 flash file
    * log2cod: v1.1 Released
    * log2cod: GPU Selftests added (some GPU find bad code, or didn't find anything at all)
    * log2cod: Added Ivan Golubev EULA
    * log2cod: Added Queue managment
    * log2cod: Code Verification added after successfull calculation
    * log2cod: Console is cleared after some salts processed in order to avoid overflow
    * log2cod: PeekNamedPipe() problem fixed
    * log2cod: Added queue processing in loop mode (you can add new jobs during calculation)
    * The transaction bar have been a bit resized
    * Cyclone Box Hardware Rev B11x, C11x added
    * Models.ini updated
    * Box USB Drivers updated to v1.0.0.6 they are digitally signed now, no more problems on Win7 / Win Vista x64
    * COM Emulation Service Driver updated to v1.0.0.1 it is digitally signed now, no more problems on Win7 / Win Vista x64
    * Main Software is now Digitally Signed (Authenthicode)
    * log2cod is now Digitally Signed (Auhtenthicode)
    * Cyclone Calculator is now Digitally Signed (Authenthicode)
    * Installer is now Digitally Signed (Auhtnethicode)
    * New phones added to Virgin SX4 Database
    * New phones added to Security Database (Virgin RPL)
    * Box Firmware v1.53 Released
    * Some minor and major changes and bugfixes
    * Versions snap
    * Installer v1.11
    * Main x86 Application v1.0.0.11003
    * x86 Memory Manager v4.76.0.179
    * Native USB Drivers v1.0.0.6
    * USB-COM Stack Drivers v1.0.0.1
    * Onboard Secure Bootloader v2.13
    * Onboard Main Nokia Application v1.53
    * Onboard COM Emulation Code v1.00
    * Onboard Security Card Revision v1.10
    * Nokia Connectivity Cable Drivers 7.1.34.0
    * BB5 USB/FPIF Single Line/FPIF DualLine v20110301
    * DCT4 FPIF Single Line/USB v20100410
    * DCT4 Unlock Patches DEPRECATED
    * Communication Stack SSLv3-keys-06092008
    * Skin Stack v7.21
    * Box Firmware v1.53 is needed.



    Download Links
    http://www.karwos.hk/CycloneBoxInstaller.exe
    http://www.siroya.org/downloads/CycloneBoxInstaller.exe
    http://www.cyclonebox.com/downloads/...xInstaller.exe

    ps1. yes, germany support server HDD is physsicly crashed.. it will be back in few days.. hope with noncorrupted content.
    ps2. be prepared for more standalone&HOT things these days
    ps3. new drivers included in this package are ONLY compatible with this new version. Don't try using them on older builds and vice versa !


    IMPORTANT: You must update your box drivers to work with the new software version. To do this, after you installed the last exe, go in hardware manager and update your drivers looking for them in the folder c:\Program files\Cyclone box\Drivers. Once done, please, update your box firmware using the new software version. Failing doing this step will mean getting this error



    Code:
    Box Maintenance procedure started at 16:24:27
    Box Open Error -> Security problem #5
    Box Maintenance Error -> No connection was established, or box is not in needed mode
    Best Regards,
    Cyclone Team

  16. #12
    Moderator DUNIACELL's Avatar
    Join Date
    Mar 2009
    Location
    TANGERANG,BANTEN. 2a4a3440
    Posts
    602
    Thanks
    108
    Thanked 695 Times in 159 Posts
    Rep Power
    13

    Default Cyclone Standalone Unlock/SX4 Auth/SD Keys repair for 6700,E52,E55,E72,X3,.. added

    Cyclone Standalone Unlock/SX4 Auth/SD Keys repair for 6700,E52,E55,E72,X3,.. added

    Hi, new update for Cyclone box is avaiable.

    - Added SP unlock via server / log2cod reading
    - Added standalone SX4 auth
    - Added standalone Superdongle Keys Repair
    - Supported phones:
    - RAPU Based: 5630, 6260s, 6700c, 6700s, 6710n, 6720c, 6730, 6750, E52, E55, E72
    - RAP4 Based: 3710, 5330, 7230, 6303i, X3

    All is free and standalone Box firmware upgrade to v1.54 is needed.

    Download Link: http://www.karwos.hk/Cyclone_RAPU_RAP4_Unlock.rar - please extract to your current Cyclone box directory...
    Installer link: http://www.karwos.hk/CycloneBoxInstaller.exe

    More will come next week .. or tihs week. who knows

    Ps1. Please install installer v1.11 first (this one releaesed yesterday!)
    Ps2. dont forget to upgrade drivers! Else you will get "Security problem #5"

    Best Regards,
    Cyclone Team

  17. #13
    Moderator DUNIACELL's Avatar
    Join Date
    Mar 2009
    Location
    TANGERANG,BANTEN. 2a4a3440
    Posts
    602
    Thanks
    108
    Thanked 695 Times in 159 Posts
    Rep Power
    13

    Thumbs up Cyclone Box Installer v1.12 Released

    Hi, new installer is ready.

    =====================
    Installer v1.12
    09.03.2011

    =====================
    - Firmware v1.55 introduced - RAP4 CMT Booting (Wrong first char) fixed
    - Added SP unlock via server / log2cod reading
    - Added standalone SX4 auth
    - Added standalone Superdongle Keys Repair
    - Supported phones:
    - RAPU Based: 5630, 6260s, 6700c, 6700s, 6710n, 6720c, 6730, 6750, E52, E55, E72
    - RAP4 Based: 3710, 5330, 7230, 6303i, X3
    - Minor changes and bugfixes

    Download Links :
    http://www.karwos.hk/CycloneBoxInstaller.exe
    http://www.cyclonebox.com.downloads/...staller(2).exe

    In case of RAP4 mobiles make sure you are using cables with:
    1) *******ted MBUS line 2) Digital ground connectet to analog 3) most possible short, without adapter

    Else - you will get booting problems.

    Best Regards,
    Cyclone Team

  18. #14
    Moderator dutagsm's Avatar
    Join Date
    Jan 2010
    Location
    Sanggau Kapuas, KalBar
    Posts
    1,547
    Thanks
    388
    Thanked 3,054 Times in 817 Posts
    Rep Power
    36

    Default Re: Cyclone Box Installer v1.12 Released

    Cyclone Box v1.57 1st in world ORIGINAL RPL BACKUP and SD BACKUP for RAPU/RAP4/RAPID

    Hi, new firmware for Cyclonebox is Avaiable.



    - Added PM308 decryption for NEW phones (RAPU , RAP3Gv4, RAPIDO New ), that means you can:

    - Superdongle Key backup

    - CMLA Key backup

    - Correct Phone Security Analysis for this phones

    - Correct MCU/DSP timestamps analysis

    - Phone auhtorization without corrupting SD key, when SD key is correct

    - After local SX4 auth , phone STILL MIGHT BE authorized with ORIGINAL NOKIA SX4 CARD

    - Created RPL from RAPU/RAP4 phones are now 100% like delivered from Nokia! That means after full erase and writing back backed-up RPL, your phone STILL MIGHT BE AUTHORIZED WITH ORIGINAL SX4 CARD - no security issues !

    - Created RPL from RAPU phones might also SAVE PHONE from DESTROYING by some other tools (Contact Service after upgrade to latest versions...)

    - Minor changes and bugfixes



    This is firmware-side update only, upgrade your box firmware to v1.57 and use latest installer v1.12





    Created RPL with FULL NOKIA CONTENT (SD, CMLA, ...)



    Quote:

    RPL Creation started...

    Processing CMT Part...

    Storing Product Code...

    Storing PSN...

    Storing HWID...

    Trying to store Simlock...

    Reading Configuration Key...

    Hashing...

    Reading SHA1-RSA Signature...

    Reading SHA1-HMAC Signature...

    Storing Simlock...

    Trying to store WMDRM RPL...

    Reading Keys...

    Storing WMDRM PD...

    Reading Security Block...

    Security block OK and saved to "RM-469_355216039314532_2011-03-10_130535.SecurityBlock.PM"

    "1BB0020A296303443292389F545846C201100A5C.C000 3160 " Exists, That is good...

    Storing Additional Data...

    Checking Superdongle Key...

    Encrypting Superdongle Key...

    Storing Superdongle Key...

    Checking CMLA Key...

    Storing CMLA Key...

    Booting CMT...

    CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102011104

    CMT_EM_ASIC_ID: 00001040

    CMT_EM_ASIC_ID: 00001030

    CMT_PUBLIC_ID: 1BB0020A296303443292389F545846C201100A5C

    CMT_ASIC_MODE_ID: 00

    CMT_ROOT_KEY_HASH: 25B977A055BE9B5DEC0C38A2A279C695

    CMT_BOOT_ROM_CRC: 3E273BF6

    CMT_SECURE_ROM_CRC: 37BE26FA

    CMT Ready!

    Searching for BootCode: DualLine 32Bit

    RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.48.1, Algo: BB5

    Flashbus Write baud set to 1.0Mbits

    Flashbus Read baud set to 98Kbits

    Using NEW BB5 FLASHING PROTOCOL

    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding

    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit

    Box TX2 Data Pin set to: Service Pin 3

    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM

    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC

    FlashChip[0,CMT]: 0x0020004000000031, ST, NOR

    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR

    FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND

    Requested Algorithm: XSR 1.6 (CMT)

    Searching for BootCode: DualLine 32Bit

    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported

    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported

    RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.10.48.1, Algo: XSR 1.6

    Initializing TurboCache...

    TurboCache Loaded!

    Writing CMT PASUBTOC Certificate...

    Writing CMT ALG Certificate...

    CMT Algorithm Ready!

    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding

    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit

    Box TX2 Data Pin set to: Service Pin 3

    Adding FUR Client (CMT, State: Ready)...

    CMT FUR Ready!

    Box VPP disabled

    Internal CMT Phone VPP Enabled

    PAPUBKEYS Hash for CMT: 85F252E351E225CAFC4DFBC8041EABD2823E3500

    APE Subsystem Not Found

    Flashbus Write baud set to 5.0Mbits

    Storing NPC...

    Storing CCC...

    Storing HWC...

    CMT VARIANT Not Found

    Restarting MCU...

    RPL Saved OK

    Example seccurity analysis, timestamp analysis, etc for RAPU



    Quote:

    Started Reading MCU & DSP Timestamps...

    MCU Version V ICPR82_09w46.8

    MCU Date 30-03-10

    Product RM-469 (Nokia E52)

    Manufacturer (c) Nokia

    IMEI 355216039314532

    Mastercode 2637612627

    Reading Security Block...

    Security block OK and saved to "RM-469_355216039314532_2011-03-10_130314.SecurityBlock.PM"

    "1BB0020A296303443292389F545846C201100A5C.C000 3160 " Exists, That is good...

    Booting CMT...

    CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102011104

    CMT_EM_ASIC_ID: 00001040

    CMT_EM_ASIC_ID: 00001030

    CMT_PUBLIC_ID: 1BB0020A296303443292389F545846C201100A5C

    CMT_ASIC_MODE_ID: 00

    CMT_ROOT_KEY_HASH: 25B977A055BE9B5DEC0C38A2A279C695

    CMT_BOOT_ROM_CRC: 3E273BF6

    CMT_SECURE_ROM_CRC: 37BE26FA

    CMT Ready!

    Searching for BootCode: DualLine 32Bit

    RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.48.1, Algo: BB5

    Flashbus Write baud set to 1.0Mbits

    Flashbus Read baud set to 98Kbits

    Using NEW BB5 FLASHING PROTOCOL

    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding

    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit

    Box TX2 Data Pin set to: Service Pin 3

    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM

    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC

    FlashChip[0,CMT]: 0x0020004000000031, ST, NOR

    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR

    FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND

    Requested Algorithm: XSR 1.6 (CMT)

    Searching for BootCode: DualLine 32Bit

    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported

    FlashChip 0x00200040 (ST), Size: 256MBytes, VPP: Not Supported

    RAPUv11_XSR17_alg.fg, Type: Algorithm, Rev: 768.10.48.1, Algo: XSR 1.6

    Initializing TurboCache...

    TurboCache Loaded!

    Writing CMT PASUBTOC Certificate...

    Writing CMT ALG Certificate...

    CMT Algorithm Ready!

    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding

    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit

    Box TX2 Data Pin set to: Service Pin 3

    Adding FUR Client (CMT, State: Ready)...

    CMT FUR Ready!

    Box VPP disabled

    Internal CMT Phone VPP Enabled

    PAPUBKEYS Hash for CMT: 85F252E351E225CAFC4DFBC8041EABD2823E3500

    APE Boot skipped on user request

    Flashbus Write baud set to 5.0Mbits

    Reading MCUSW...

    Reading DSP0...

    Restarting MCU...

    ------ SECURITY BLOCK TIMESTAMPS ------

    Timestamp Slots Detected: 4

    Timestamp[1] "AENO", 2010-02-19 11:11:38

    Timestamp[1] Hash "0BCD489612D4A4968B4D42A5631FC85C5D7E0E81"

    Timestamp[1] Factory MCUSW Timestamp 1970-01-01 02:00:00

    Timestamp[1] Dejan Hack Detected

    Timestamp[1] ValidAfter Factory MCUSW Test Passed OK!

    Timestamp[2] "CMCU", 2010-04-02 1108

    Timestamp[2] Hash "4CC50641D7C45E9DFE2967D4802C8710547BF54A"

    Timestamp[2] Factory MCUSW Timestamp 2009-09-02 15:18:02

    Timestamp[2] ValidAfter Factory MCUSW Test Passed OK!

    Timestamp[3] "CDSP", 2010-04-02 1107

    Timestamp[3] Hash "D8C94BFA607710D856D8C78A9CE3EB411CD7AC4C"

    Timestamp[3] Factory MCUSW Timestamp 2009-09-02 15:18:02

    Timestamp[3] ValidAfter Factory MCUSW Test Passed OK!

    Timestamp[4] "AMCU", 2010-04-02 1109

    Timestamp[4] Hash "BFC854388C2C26014F05B5084A8033CB30E472EB"

    Timestamp[4] Factory MCUSW Timestamp 2009-09-02 15:18:02

    Timestamp[4] ValidAfter Factory MCUSW Test Passed OK!

    -------------------------------------

    ------ ACTUAL FLASH TIMESTAMPS ------

    MCUSW Timestamp 2010-04-02 1108

    Flash MCUSW Timestamp synchronized with Security Block MCUSW Timestamp OK!

    DSP Timestamp 2010-04-02 1107

    Flash DSP Timestamp synchronized with Security Block DSP Timestamp OK!

    -------------------------------------

    Finished, MCU and DSP Timestamps looks good!

    Started Phone Security Analysis...

    MCU Version V ICPR82_09w46.8

    MCU Date 30-03-10

    Product RM-469 (Nokia E52)

    Manufacturer (c) Nokia

    IMEI 355216039314532

    Mastercode 2637612627

    Reading Security Block...

    Security block OK and saved to "RM-469_355216039314532_2011-03-10_130516.SecurityBlock.PM"

    Step 1 : Testing SIMLOCK

    SIMLOCK SEFLTEST PASSED OK!

    Step 2 : Testing SECURITY

    SECURITY SEFLTEST PASSED OK!

    Step 3 : Analyzing Security Block

    "1BB0020A296303443292389F545846C201100A5C.C000 3160 " Exists, That is good...

    Checking SUPERDONGLE...

    SUPERDONGLE FOUND AND CHECKSUM OK! PASSED!

    Checking SIMLOCK...

    Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)

    Checking MCU&DSP TIMESTAMPS...

    MCU&DSP TIMESTAMPS FOUND AND CHECKSUM OK! PASSED!

    Checking CMLA KEYS...

    CMLA KEYS FOUND AND CHECKSUM OK! PASSED!

    Checking ECC KEYS...

    ECC KEYS FOUND AND CHECKSUM OK! PASSED!

    Checking DIV KEYS...

    DIV KEYS FOUND AND CHECKSUM OK! PASSED!

    Analyze finished!

    Download Link: http://www.karwos.hk/CycloneBoxInstaller.exe

    Best Regards,

    Cyclone Team

  19. #15
    Super Moderator sadermo's Avatar
    Join Date
    May 2009
    Location
    ◄repair boot/dead boot►
    Posts
    2,081
    Thanks
    449
    Thanked 2,113 Times in 621 Posts
    Rep Power
    29

    Thumbs up Cyclone!! FREE, STANDALONE UNLOCK/SD REPAIR/SX4 AUTH/SD BACKUP/..FOR ALL NEW BB5 HASH

    Hi, new update for Cyclone Box is ready.

    Reading of LOG file added for all latest hashes and roms using new flashing protocol for RAPU CPU.

    This means you can now:
    - SP Unlock using LOG2COD
    - Repair supedongle keys
    - Backup superdongle key - FIRST AND ONLY IN THE WORLD (no other box support new encryption!)
    - Create RPL from phone - 100% Nokia LIke (with ALL security)
    - Standalone SX4 authorization without SX4 Card (only box)
    - Detailed security analysis
    - Read MCU&DSP Timestamps
    - Others (soon....)

    The new logreading method is simply not related to Rootkey hash.
    If loader is signed for given hash and runs ok - it will work.
    RAPU Loader is signed for following hashes (however most of them even not exists in production, or keys isn't use anymore, but as long as other teams provide this hashes, we will provide it too):

    68597B9162BAB81AF74C56E78EA2588F
    EA81B32860B86EF4231A11831045F3E6
    8E309B54DA1ADDE27C2A035D63AACACD
    916F75217F32081248B15C38DFC8E81B - Nokia X3-02, Nokia C5, Nokia E5, Nokia N8, Nokia C7, Nokia C3-01
    DA550B5BAAB517409088A3E4F3EB53AC
    46802B476C93A05CBAF76A64752086A9*
    25B977A055BE9B5DEC0C38A2A279C695 - 5630, 6260s, 6700c, 6700s, 6710n, 6720c, 6730, 6750, E52, E55, E72
    700370BCF8AFBAB25DD62DBD124FD9CE - Nokia 5630
    87FAC992288DA497A663E5DDC0410B11
    928E5FFB88D81E5F74729A212AB9D12E
    F2D76DFAFD66C7F195F278417DF05888
    F682624FFB08F6D955DBE7D9C0485084
    55DF9CBCC80B17225043DDA1CC783C97

    Of course update is free, we don't ask for any activations, we don't even require internet connection.

    For reading Log file you need valid TX2 enabled cable (otherwise software will hangup upon Getting Configuration!).

    Here is tested with Nokia C5 (thx Moulnisky!)

    Reading SL3 LOG File...
    MCU Version V ICPR82_10w08
    MCU Date 26-02-10
    Product RM-645 (Nokia C5)
    Manufacturer (c) Nokia
    IMEI 354847049967066
    Mastercode 5222614247
    WARNING: "0AC00114AD9C03443A69EAF6BE05ED1B1E10F214.C000 249F " Not Exists, Will read it...
    Reading CYC file from phone...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102031104
    CMT_EM_ASIC_ID: 00000C35
    CMT_EM_ASIC_ID: 00000C30
    CMT_PUBLIC_ID: 0AC00114AD9C03443A69EAF6BE05ED1B1E10F214
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: 916F75217F32081248B15C38DFC8E81B
    CMT_BOOT_ROM_CRC: E693EF0D
    CMT_SECURE_ROM_CRC: AC22615B
    CMT Ready!
    New_RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.10.48.1, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using NEW BB5 FLASHING PROTOCOL
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0020004000000031, ST, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x0020004000000031, ST, ONENAND
    Requested Algorithm: XSR 1.6 (CMT)
    Loader: RAPxx CommonBoot v1.02 (C) 2011 Karwos Labs
    Custom loader running OK! Working...
    Readed OK, Saving to "0AC00114AD9C03443A69EAF6BE05ED1B1E10F214.C000 249F "
    Success!
    More will come next week probably together with new installer,bugfixes,and features....

    Where from download?

    http://www.karwos.hk/CycloneNewUnlock.exe

    Box Firmware v1.60 is ORDINARY for this update !

    Best Regards,
    Cyclone Team

  20. #16
    Super Moderator sadermo's Avatar
    Join Date
    May 2009
    Location
    ◄repair boot/dead boot►
    Posts
    2,081
    Thanks
    449
    Thanked 2,113 Times in 621 Posts
    Rep Power
    29

    Thumbs up Cyclone BOMB!! ALL NEW RAPIDO HASH STANDALONE SL2/SL3 UNLOCK / SD REPAIR / SX4 AUTH..

    Hi, new update for Cyclone Box is ready.

    Reading of LOG file added for all latest hashes and roms using new flashing protocol for RAPIDO CPU.

    This means you can now:
    - SP Unlock using LOG2COD (SL3 phones)
    - Direct SP unlock of SL2 479cc.. based mobiles using NCK calculation
    - Direct SP unlock of SL2 479cc.. based mobiles using RPL calculation
    - Repair supedongle keys
    - Create RPL from phone - 100% Nokia LIke (with ALL security)
    - Standalone SX4 authorization without SX4 Card (only box)
    - Detailed security analysis
    - Read MCU&DSP Timestamps
    - Others (soon....)

    The new logreading method is simply not related to Rootkey hash.
    If loader is signed for given hash and runs ok - it will work.
    RAPIDO Loader is signed for following hashes (however most of them even not exists in production, or keys isn't use anymore, but as long as other teams provide this hashes, we will provide it too):

    68597B9162BAB81AF74C56E78EA2588F
    EA81B32860B86EF4231A11831045F3E6
    8E309B54DA1ADDE27C2A035D63AACACD
    916F75217F32081248B15C38DFC8E81B
    DA550B5BAAB517409088A3E4F3EB53AC
    B8C3ADECFC997FCD8081D3DEAF870B8C
    479C6DDE3942E12C429C1D6ADED80371
    C70CB07324056BC66A824347F40DB2D5
    B1A9CEADB5CE9CF9FB4F442150AA8E09
    46802B476C93A05CBAF76A64752086A9
    1B0D74C532CA1C6133940C740E8C786E
    25B977A055BE9B5DEC0C38A2A279C695
    700370BCF8AFBAB25DD62DBD124FD9CE
    9DDBFCFE6E73CED7D8C6268C8EB85723
    7B045400E1752022F9EB80B0DEA9C65D
    928E5FFB88D81E5F74729A212AB9D12E
    F2D76DFAFD66C7F195F278417DF05888
    CAEEBB65D3C48E6DC73B49DC5063A2EE
    FCB5C510AF7F09F313D9BDE85A707CC0
    9A28E119033B91D14D22838C86D0D53C
    F682624FFB08F6D955DBE7D9C0485084
    55DF9CBCC80B17225043DDA1CC783C97
    38F312750F686F9FC9B1B3778774A195
    BAF3A9C3DBFA8454937DB77F2B8852B1
    A5404AE83A594ECADEE532F0C236BFA6
    E9EFF4BFAA5393217CA6B17755FC3E14

    Of course update is free, we don't ask for any activations, we don't even require internet connection.
    For reading Log file you need valid TX2 enabled cable (otherwise software will hangup upon Getting Configuration!).

    Here is tested with Nokia 5800-SL3-479cc (thx Moulnisky!)

    Reading SL3 LOG File...
    MCU Version V ICPR72_09w20.15
    MCU Date 30-12-09
    Product RM-356 (Nokia 5800 XpressMusic)
    Manufacturer (c) Nokia
    IMEI 352012047692891
    Mastercode 413074336
    WARNING: "05C00008DF1F00527E9AEF53D8B8ACEC8C185116.C000 0607 " Not Exists, Will read it...
    Reading CYC file from phone...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051103
    CMT_EM_ASIC_ID: 00000296
    CMT_EM_ASIC_ID: 00000B22
    CMT_PUBLIC_ID: 05C00008DF1F00527E9AEF53D8B8ACEC8C185116
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: 479C6DDE3942E12C429C1D6ADED80371
    CMT_BOOT_ROM_CRC: 4B9B7510
    CMT_SECURE_ROM_CRC: 3E691FF8
    CMT Ready!
    New_RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.10.48.1, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using NEW BB5 FLASHING PROTOCOL
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x00EC004000000121, Samsung, ONENAND
    Requested Algorithm: XSR 1.5 (CMT)
    Sending Auxiliary Loader...
    Auxiliary Loader Sent!
    Loader: RAPxx CommonBoot v1.03 (C) 2011 Karwos Labs
    Custom loader running OK! Working...
    Readed OK, Saving to "05C00008DF1F00527E9AEF53D8B8ACEC8C185116.C000 0607 "
    Success!

    Where from download?

    http://www.karwos.hk/CycloneNewUnlockV2.exe

    Box Firmware v1.60 is ORDINARY for this update !

  21. #17
    Moderator vortune_labs's Avatar
    Join Date
    Sep 2007
    Location
    Out World in REal ELMs!
    Posts
    1,395
    Thanks
    11
    Thanked 2,012 Times in 342 Posts
    Rep Power
    28

    Default Re: Update.! Cyclone News n Installers

    Cyclone STOP THE UNSTOPPABLE!! NEW RAPIDO ENCRYPTION, 1ST SD/CMLA/SX BACKUP, MORE!!!!

    We are Back Again with Yet Another HOT Update


    First we are sorry for problems caused by previous release.

    In this version we implemented new encryption routines for New MCU RAPIDO Phones.

    That means you can now:


    - Read correct LOG file for SL3 SP Unlock (sorry, discard previous ones!)
    - Direct SP Unlock of SL2 New hash (479cc based) phones (6760, 6120c) using NCK Calculation
    - Direct SP Unlock of SL2 New hash (479cc based) phones (6760, 6120c) using RPL Calculation
    - Absolutly FIRST IN THE WORLD - Superdongle Key Backup for new hash - no other tool support it
    - Absolutly FIRST IN THE WORLD - Standalone SX4 authorization without Superdongle key corruption
    - Absolutly FIRST IN THE WORLD - CMLA/WMDRM Key backup
    - Absolutly FIRST IN THE WORLD - 1:1 Original Nokia RPL Backup (w/o risk of DAMAGING phones!)
    - Security analysis
    - The new encryption works also for old rapido phones (CAEEBB based) which noone tool could properly decrypt Superdongle/etc data
    - More ..


    Supported hashes:


    68597B9162BAB81AF74C56E78EA2588F
    EA81B32860B86EF4231A11831045F3E6
    8E309B54DA1ADDE27C2A035D63AACACD
    916F75217F32081248B15C38DFC8E81B
    DA550B5BAAB517409088A3E4F3EB53AC
    B8C3ADECFC997FCD8081D3DEAF870B8C
    479C6DDE3942E12C429C1D6ADED80371
    C70CB07324056BC66A824347F40DB2D5
    B1A9CEADB5CE9CF9FB4F442150AA8E09
    46802B476C93A05CBAF76A64752086A9
    1B0D74C532CA1C6133940C740E8C786E
    25B977A055BE9B5DEC0C38A2A279C695
    700370BCF8AFBAB25DD62DBD124FD9CE
    9DDBFCFE6E73CED7D8C6268C8EB85723
    7B045400E1752022F9EB80B0DEA9C65D
    928E5FFB88D81E5F74729A212AB9D12E
    F2D76DFAFD66C7F195F278417DF05888
    CAEEBB65D3C48E6DC73B49DC5063A2EE
    FCB5C510AF7F09F313D9BDE85A707CC0
    9A28E119033B91D14D22838C86D0D53C
    F682624FFB08F6D955DBE7D9C0485084
    55DF9CBCC80B17225043DDA1CC783C97
    38F312750F686F9FC9B1B3778774A195
    BAF3A9C3DBFA8454937DB77F2B8852B1
    A5404AE83A594ECADEE532F0C236BFA6
    E9EFF4BFAA5393217CA6B17755FC3E14



    And All This off course Without
    ANY ACTIVATION , LOGS OR INTERNET


    small tests
    Nokia X6
    Spoiler:
    MCU Version V ICPR72_10w04.5
    MCU Date 22-03-10
    Product RM-559 (Nokia X6)
    Manufacturer (c) Nokia
    IMEI 352006046910791
    Mastercode 134767774
    IMEI Spare 3A25000664197009
    IMEI SV 3325000664197019F4000000
    CNT v 001_000, 17-03-10, vanilla, RM559rRM559_002_001_M004,
    PSN CSF672051
    Product Code 059B8W2
    Basic Product Code 0589312
    PSD 0000000000000000
    LPSN 0
    WLAN MAC A04E047F2AB8
    APE Software V 20.0.005
    APE Variant V 20.0.005V 20.0.005 20.0.005.360.02
    APE Test rm559_ENO_A_09wk28v0.440
    APE Hardware 256
    APE ADSP 256
    RETU 16
    TAHVO 22
    AHNE 11
    Hardware 1123
    RFIC |Vapaus_5.1 | Aura_?.?
    DSP ICPR72_10w05
    Simlock Server SIMLOCK SERVER
    Simlock Key 2140400086388183
    Simlock Profile 8000000000000000
    Simlock Key Cnt 0
    Simlock FBUS Cnt 0
    Simlock [1,1] State: OPENED Type: MCC-MNC Data: 21404F
    Simlock NCK #pw+>FKT72534805121+7#
    Started Phone Security Analysis...
    MCU Version V ICPR72_10w04.5
    MCU Date 22-03-10
    Product RM-559 (Nokia X6)
    Manufacturer (c) Nokia
    IMEI 352006046910791
    Mastercode 134767774
    Reading Security Block...
    Security block OK and saved to "RM-559_352006046910791_10052011_220737.SecurityBlock. PM"
    Step 1 : Testing SIMLOCK
    SIMLOCK SEFLTEST PASSED OK!
    Step 2 : Testing SECURITY
    SECURITY SEFLTEST PASSED OK!
    Step 3 : Analyzing Security Block
    WARNING: "1A60010D468C0052CBA704F8193E26C1B8325289.C000 0805 " Not Exists, Will read it...
    Reading CYC file from phone...
    Booting CMT...
    CMT_SYSTEM_ASIC_ID: 000000010000022600010006400C192101051103
    CMT_EM_ASIC_ID: 00000296
    CMT_EM_ASIC_ID: 00000B22
    CMT_PUBLIC_ID: 1A60010D468C0052CBA704F8193E26C1B8325289
    CMT_ASIC_MODE_ID: 00
    CMT_ROOT_KEY_HASH: 479C6DDE3942E12C429C1D6ADED80371
    CMT_BOOT_ROM_CRC: 4B9B7510
    CMT_SECURE_ROM_CRC: 3E691FF8
    CMT Ready!
    New_RAPIDOv11_2nd.fg, Type: 2nd Boot Loader, Rev: 512.10.48.1, Algo: BB5
    Flashbus Write baud set to 1.0Mbits
    Flashbus Read baud set to 98Kbits
    Using NEW BB5 FLASHING PROTOCOL
    Default Transmission Mode Requested by Loader: Dual Line, 32 bit, Overriding
    Transmission Mode Requested: Dual Line, 32 bit, Accepted: Dual Line, 32 bit
    Box TX2 Data Pin set to: Service Pin 3
    FlashChip[0,CMT]: 0x0000000000000000, Unknown, RAM
    FlashChip[0,CMT]: 0xFFFF000000000000, Unknown, MMC
    FlashChip[0,CMT]: 0x0400000000000000, Unknown, NOR
    FlashChip[1,CMT]: 0x0000000100000000, Unknown, NOR
    FlashChip[0,CMT]: 0x00EC005800000121, Samsung, ONENAND
    Requested Algorithm: XSR 1.6 (CMT)
    Sending Auxiliary Loader...
    Auxiliary Loader Sent!
    Loader: RAPxx CommonBoot v1.04 (C) 2011 KarwosLabs
    Custom loader running OK! Working...
    Readed OK, Saving to "1A60010D468C0052CBA704F8193E26C1B8325289.C000 0805 "
    Checking SUPERDONGLE...
    SUPERDONGLE FOUND AND CHECKSUM OK! PASSED!
    Checking SIMLOCK...
    Failed to decode Security Section, Box Reported: Security Section Not Found (SL3 phone?)
    Checking MCU&DSP TIMESTAMPS...
    MCU&DSP TIMESTAMPS FOUND AND CHECKSUM OK! PASSED!
    Checking CMLA KEYS...
    CMLA KEYS FOUND AND CHECKSUM OK! PASSED!
    Checking ECC KEYS...
    ECC KEYS FOUND AND CHECKSUM OK! PASSED!
    Checking DIV KEYS...
    DIV KEYS FOUND AND CHECKSUM OK! PASSED!
    Analyze finished!


    (Firmware v1.61 required)

    Download links
    VORTUNE LINK 1
    VORTUNE LINK 2
    VORTUNE LINK 3


  22. The Following User Says Thank You to vortune_labs For This Useful Post:


  23. #18
    Beginner Member capoenx26's Avatar
    Join Date
    Nov 2009
    Location
    java
    Posts
    59
    Thanks
    218
    Thanked 16 Times in 8 Posts
    Rep Power
    5

    Default Re: Update.! Cyclone News n Installers

    weeeeeeeessssssss salut gan..

  24. #19
    Super Moderator sadermo's Avatar
    Join Date
    May 2009
    Location
    ◄repair boot/dead boot►
    Posts
    2,081
    Thanks
    449
    Thanked 2,113 Times in 621 Posts
    Rep Power
    29

    Default CycloneBox Installer v1.14 Released - BB5 SL2/SL3 USB Unlock/SX4Auth/SDRepair Added

    Hi to all!

    New Cyclone Box Installer v1.14 is Ready.

    What's new?


    =====================
    Installer v1.14
    07.06.2011
    =====================
    - New BB5 FBUS/USB Loaders v11.16.0 Introduced
    - Unique Data Reading for RAPIDO based phones by USB added
    - Unique Data Reading for RAPU based phones by USB added
    - SL2 Unlock for Old Hash (E51..,..) and New Hash (6120c,6760) just by USB cable
    - SL3 Unlock by reading LBF data for all SL3 RAPIDO/RAPU Phones
    - Standalone Superdongle Auth - without SD key corruption
    - SD Keys Repair
    - Security Analyze
    - RPL Backup
    - All this using just usb cable...
    - Our loaders automatically set phone to LocalMode after reading LogData - tested with N97, seems 1st in world
    - RAPIDO phones before reading USB LogFile, needs to be manually set into FlashMode. Apporiate messagebox will be displayed with instructions (replug battery, cable, etc..). If your phone is RAPU or RAP4 based, you don't need to reject battery or do nothing - just click OK and it will switch to RAW mode directly.
    - We also added support for FUR-like flashing for RAPIDO phones. That means it's possible to flash these phones FBUS-like (completly erased, etc - FBUS protocol emulation). However, because of many problems we've disabled it in current release. You can test it manually by placing "v11.16.0" RAPIDO loaders into \Loaders\BB5\FPIF32BIT.
    * Known problems with RAPIDO 11.16.0 loaders:
    * FBUS support is broken
    * Readed Certificates via USB is broken (Control transactions support up to ~0x90 bytes of upcoming data)
    * Probably not working with Axxxx ROMS (E51)
    * Lot of other issues observed
    - The FUR-like flashing (not ADL though) will be probably enabled in next version after closer investigation
    - Fixed oclHashCat COD File bugs (occurs when last digit of imei is 0)
    - Box Firmware v01.62 Released
    - Minor changes and bugfixes

    All, of course, standalone and free Tested with:


    Firmware v01.62 is required for this installer.

    Where from download?


    http://www.karwos.hk/CycloneBoxInstaller.exe

  25. #20
    Super Moderator sadermo's Avatar
    Join Date
    May 2009
    Location
    ◄repair boot/dead boot►
    Posts
    2,081
    Thanks
    449
    Thanked 2,113 Times in 621 Posts
    Rep Power
    29

    Default Cyclone Box Firmware v01.64 Released

    advertisement
    Hi, new firmware for Cyclone Box was just uploaded at our server.

    What's new?

    - blackberry MEP-24660-003 added
    - blackberry MEP-34870-001 added
    - blackberry MEP-39371-001 added
    - blackberry MEP-40488-002 added
    - blackberry MEP-40954-001 added
    - blackberry MEP-41468-001 added
    - XGold1 ASC Flashing Booting issues solved
    - Minor changes and bugfixes


    This is server-side update only.
    Upgrade your box using "Box Maintenance".


    Best Regards & Stay Tuned,
    Cyclone Box Team

Page 1 of 2 12 LastLast
Selular 88