Software Pulsa Tiger Engine
gathering 2014 yogyakarta

advertisement   advertisement   advertisement

Results 1 to 8 of 8

5130 Failed to read SP data

This is a discussion on 5130 Failed to read SP data within the BB5 forums, part of the Nokia category; waktu diflash muncul ginian Version from phone: 07.97 Version from file: 07.97 Using device: UFS_USB V2.8 (c) SarasSoft 2007. Library ...

  1. #1
    Full Member z_bilqis's Avatar
    Join Date
    Nov 2010
    Location
    pasuruan
    Posts
    172
    Thanks
    4
    Thanked 21 Times in 19 Posts
    Rep Power
    4

    Default 5130 Failed to read SP data

    waktu diflash muncul ginian

    Version from phone: 07.97
    Version from file: 07.97
    Using device: UFS_USB V2.8 (c) SarasSoft 2007.
    Library version: 1.0.0.9274(01-03-2011), 1.0.0.15761(01-03-2011)
    Rpl backup already exist (C:\mobileEx\3.4\data\backup\BB5_35694403770650_BA CK.rpl).
    CMT Data :
    SYSTEM ASIC ID: 000000010000022600010006030C192101033000 [RAP3G ver: PA 3.x]
    EM0 ID: 00000296
    EM1 ID: 00000B22
    PUBLIC ID: 20C0010FBFCE8B56BCDE1276F2D5FC3B1ED1B57C
    ASIC MODE ID: 00
    ROOT KEY HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
    ROM ID: 273F6D55DFAAF68F
    SecondaryBoot: rap3gv3_2nd.fg [BB5] version: 1.30.0 revision: 0.0 size: 0x3C00
    Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
    FlashID0: 0089 8982 - 0000 0000 [Intel NU48F512,512 Mbits] type: NOR,CMT
    ExtBUSC: 0000 0000 0000 0000 0000 0000 0000 0000
    TransmissionMode: 16Bit
    Algorithm: RAP3Gv3_algo_131.fg [BB5 ALGORITHM] version: 1.31.0 revision: 0.0 size: 0x297E0
    Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
    CMT PAPUBKEYS HASH: 0C917F11196FDB7378C18EF7260698CA4489DCA0
    TransmissionMode: DDR&TX2
    Processing MCU file: rm495__07.97.mcusw
    [BB5,BB5 ALGORITHM] size: 18.20 MB
    Supported Ids: 010C192101013000, 0103192101003000, 0303192101033000, 030C192101033000
    Storing certificate [NPC, VARIANT, R&D, CCC, HWC] ...OK
    Erase size: 21.00 MB
    CMT NOR area [00000000-000006BF]
    CMT NOR area [000006C0-0001FFFF]
    CMT NOR area [00040000-000BFFFF]
    CMT NOR area [000C0000-0013FFFF]
    CMT NOR area [00140000-0137FFFF]
    CMT NOR area [01380000-0151FFFF]
    erased in 2 min 2.531 sFlash programming ...
    CMT PAPUBKEYS: 0C917F11196FDB7378C18EF7260698CA4489DCA0 (RAP Certificate 164 v.1) written.
    Programming completed in 1 min 59.500 s
    Processing PPM file: rm495__07.97.ppm_x
    [BB5,BB5 ALGORITHM] size: 7.72 MB
    Supported Ids: 010C192101013000, 0103192101003000, 0303192101033000, 030C192101033000
    Erase size: 8.62 MB
    CMT NOR area [01520000-01DBFFFF]
    erased in 41.781 sFlash programming ...
    Error chk C7012D0103CD000010000000F1
    RX2 not responding, please check BSI/cable/pinout !
    Error while programming [00] at 0x01940000, Result: 0010
    RX Buffer: C7012D0103CD000010000000F172

  2. Asisten VRE
    Kiswara Modem
  3. #2
    Advance Member ap3l7in's Avatar
    Join Date
    Jul 2009
    Location
    under control ALLAH
    Posts
    641
    Thanks
    125
    Thanked 305 Times in 95 Posts
    Rep Power
    9

    Default Re: 5130 Failed to read SP data

    Quote Originally Posted by z_bilqis View Post
    waktu diflash muncul ginian

    Version from phone: 07.97
    Version from file: 07.97
    Using device: UFS_USB V2.8 (c) SarasSoft 2007.
    Library version: 1.0.0.9274(01-03-2011), 1.0.0.15761(01-03-2011)
    Rpl backup already exist (C:\mobileEx\3.4\data\backup\BB5_35694403770650_BA CK.rpl).
    CMT Data :
    SYSTEM ASIC ID: 000000010000022600010006030C192101033000 [RAP3G ver: PA 3.x]
    EM0 ID: 00000296
    EM1 ID: 00000B22
    PUBLIC ID: 20C0010FBFCE8B56BCDE1276F2D5FC3B1ED1B57C
    ASIC MODE ID: 00
    ROOT KEY HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
    ROM ID: 273F6D55DFAAF68F
    SecondaryBoot: rap3gv3_2nd.fg [BB5] version: 1.30.0 revision: 0.0 size: 0x3C00
    Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
    FlashID0: 0089 8982 - 0000 0000 [Intel NU48F512,512 Mbits] type: NOR,CMT
    ExtBUSC: 0000 0000 0000 0000 0000 0000 0000 0000
    TransmissionMode: 16Bit
    Algorithm: RAP3Gv3_algo_131.fg [BB5 ALGORITHM] version: 1.31.0 revision: 0.0 size: 0x297E0
    Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
    CMT PAPUBKEYS HASH: 0C917F11196FDB7378C18EF7260698CA4489DCA0
    TransmissionMode: DDR&TX2
    Processing MCU file: rm495__07.97.mcusw
    [BB5,BB5 ALGORITHM] size: 18.20 MB
    Supported Ids: 010C192101013000, 0103192101003000, 0303192101033000, 030C192101033000
    Storing certificate [NPC, VARIANT, R&D, CCC, HWC] ...OK
    Erase size: 21.00 MB
    CMT NOR area [00000000-000006BF]
    CMT NOR area [000006C0-0001FFFF]
    CMT NOR area [00040000-000BFFFF]
    CMT NOR area [000C0000-0013FFFF]
    CMT NOR area [00140000-0137FFFF]
    CMT NOR area [01380000-0151FFFF]
    erased in 2 min 2.531 sFlash programming ...
    CMT PAPUBKEYS: 0C917F11196FDB7378C18EF7260698CA4489DCA0 (RAP Certificate 164 v.1) written.
    Programming completed in 1 min 59.500 s
    Processing PPM file: rm495__07.97.ppm_x
    [BB5,BB5 ALGORITHM] size: 7.72 MB
    Supported Ids: 010C192101013000, 0103192101003000, 0303192101033000, 030C192101033000
    Erase size: 8.62 MB
    CMT NOR area [01520000-01DBFFFF]
    erased in 41.781 sFlash programming ...
    Error chk C7012D0103CD000010000000F1
    RX2 not responding, please check BSI/cable/pinout !
    Error while programming [00] at 0x01940000, Result: 0010
    RX Buffer: C7012D0103CD000010000000F172
    coba ganti kabelnya bos?
    koreksi kalo salah..... newbie

  4. #3
    Full Member z_bilqis's Avatar
    Join Date
    Nov 2010
    Location
    pasuruan
    Posts
    172
    Thanks
    4
    Thanked 21 Times in 19 Posts
    Rep Power
    4

    Default Re: 5130 Failed to read SP data

    kabel normal bos, barusan juga buat ngeflash 5130 aman2 aja,
    hasil bus check

    Using device: UFS_USB V2.8 (c) SarasSoft 2007.
    Library version: 1.0.0.9274(01-03-2011), 1.0.0.15761(01-03-2011)
    CMT Data :
    SYSTEM ASIC ID: 000000010000022600010006030C192101033000 [RAP3G ver: PA 3.x]
    EM0 ID: 00000296
    EM1 ID: 00000B22
    PUBLIC ID: 20C0010FBFCE8B56BCDE1276F2D5FC3B1ED1B57C
    ASIC MODE ID: 00
    ROOT KEY HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
    ROM ID: 273F6D55DFAAF68F
    SecondaryBoot: rap3gv3_2nd.fg [BB5] version: 1.30.0 revision: 0.0 size: 0x3C00
    Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
    FlashID0: 0089 8982 - 0000 0000 [Intel NU48F512,512 Mbits] type: NOR,CMT
    ExtBUSC: 0000 0000 0000 0000 0000 0000 0000 0000
    TransmissionMode: 16Bit
    Algorithm: RAP3Gv3_algo_131.fg [BB5 ALGORITHM] version: 1.31.0 revision: 0.0 size: 0x297E0
    Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
    CMT PAPUBKEYS HASH: 0C917F11196FDB7378C18EF7260698CA4489DCA0
    TransmissionMode: DDR&TX2
    Original Imei: 35694403770650
    Original Product code: 0579019
    Bluetooth ID: 9C18740920E7

    Phone Type: RM-495 (Nokia 5130c-2)
    Software Version: V 07.97 13-09-10 RM-495 (c) Nokia
    Imei plain: 35694403770650-3
    Product Code: 0579019
    Language Pack:
    - not available.

    This is SL3 phone(Simlock2 format).
    - Avoid Software Downgrade & manual erase to this phone !

    SIMLOCK invalid!
    SUPERDONGLE_KEY seems to be valid
    CMLA_KEY seems to be valid
    WMDRM_PD seems to be valid
    SIMLOCK_TEST failed!
    SECURITY_TEST failed!


    SIMLOCK_DATA corrupted!


  5. #4
    Advance Member ashakaas's Avatar
    Join Date
    Oct 2009
    Location
    JENEPONTO SUL-SEL
    Posts
    344
    Thanks
    46
    Thanked 345 Times in 105 Posts
    Rep Power
    8

    Default Re: 5130 Failed to read SP data

    di lacikan saja dulu bossssssssssssssssss conser tuuuuu

  6. #5
    Advance Member yuki73's Avatar
    Join Date
    Oct 2010
    Posts
    325
    Thanks
    247
    Thanked 219 Times in 68 Posts
    Rep Power
    6

    Default Re: 5130 Failed to read SP data

    Quote Originally Posted by z_bilqis View Post
    kabel normal bos, barusan juga buat ngeflash 5130 aman2 aja,
    hasil bus check

    Using device: UFS_USB V2.8 (c) SarasSoft 2007.
    Library version: 1.0.0.9274(01-03-2011), 1.0.0.15761(01-03-2011)
    CMT Data :
    SYSTEM ASIC ID: 000000010000022600010006030C192101033000 [RAP3G ver: PA 3.x]
    EM0 ID: 00000296
    EM1 ID: 00000B22
    PUBLIC ID: 20C0010FBFCE8B56BCDE1276F2D5FC3B1ED1B57C
    ASIC MODE ID: 00
    ROOT KEY HASH: 9DDBFCFE6E73CED7D8C6268C8EB85723
    ROM ID: 273F6D55DFAAF68F
    SecondaryBoot: rap3gv3_2nd.fg [BB5] version: 1.30.0 revision: 0.0 size: 0x3C00
    Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
    FlashID0: 0089 8982 - 0000 0000 [Intel NU48F512,512 Mbits] type: NOR,CMT
    ExtBUSC: 0000 0000 0000 0000 0000 0000 0000 0000
    TransmissionMode: 16Bit
    Algorithm: RAP3Gv3_algo_131.fg [BB5 ALGORITHM] version: 1.31.0 revision: 0.0 size: 0x297E0
    Supported Ids: 0103192101003000, 010C192101003000, 0103192101013000, 010C192101013000, 0103192101003100, 010C192101003100, 0303192101023000, 030C192101023000, 0303192101033000, 030C192101033000, 0003192101002000, 000C192101002000, 0003192101002100, 000C192101002100, 0003192101002200, 000C192101002200, 0003192101012200, 000C192101012200, 0103192101001101, 010C192101001101, 0003192101001002, 000C192101001002, 0013192101001002, 001C192101001002
    CMT PAPUBKEYS HASH: 0C917F11196FDB7378C18EF7260698CA4489DCA0
    TransmissionMode: DDR&TX2
    Original Imei: 35694403770650
    Original Product code: 0579019
    Bluetooth ID: 9C18740920E7

    Phone Type: RM-495 (Nokia 5130c-2)
    Software Version: V 07.97 13-09-10 RM-495 (c) Nokia
    Imei plain: 35694403770650-3
    Product Code: 0579019
    Language Pack:
    - not available.

    This is SL3 phone(Simlock2 format).
    - Avoid Software Downgrade & manual erase to this phone !

    SIMLOCK invalid!
    SUPERDONGLE_KEY seems to be valid
    CMLA_KEY seems to be valid
    WMDRM_PD seems to be valid
    SIMLOCK_TEST failed!
    SECURITY_TEST failed!


    SIMLOCK_DATA corrupted!
    Kasusnya >> Failed to read sp data...>>>atau yang di atas ini boz,,,,

    aa-pulsajaya

  7. #6
    Full Member pelangi2's Avatar
    Join Date
    Aug 2009
    Location
    Tugu Nanas
    Posts
    104
    Thanks
    22
    Thanked 9 Times in 9 Posts
    Rep Power
    6

    Default Re: 5130 Failed to read SP data

    ....mending taro laci bos...kalo gak punya backup an rpl nya...... ... ampe sekarang belum ada solusi yang jitu ngatasinnya.....

  8. #7
    Beginner Member
    Join Date
    Dec 2009
    Posts
    6
    Thanks
    2
    Thanked 1 Time in 1 Post
    Rep Power
    0

    Default Re: 5130 Failed to read SP data

    coba flas pakai box lainya bos,saya juga pernah ngalami kayak gitu

  9. #8
    Full Member z_bilqis's Avatar
    Join Date
    Nov 2010
    Location
    pasuruan
    Posts
    172
    Thanks
    4
    Thanked 21 Times in 19 Posts
    Rep Power
    4

    Default Re: 5130 Failed to read SP data

    advertisement
    Failed to read sp data, maunya sih ta imei cantik'an saja kalo bisa, dari pada conser gini g bisa dipakai kan kasihan usernya juga.

Selular 88

Similar Threads

  1. 5130 Failed to read SP data
    By z_bilqis in forum BB5
    Replies: 7
    Last Post: 29th February 2012, 17:14
  2. 1208 Failed to read SP data
    By fahri susanto in forum MxKey Dongle
    Replies: 13
    Last Post: 14th September 2011, 13:59
  3. N2626 error at 120, read PM failed
    By Ali hariyanto in forum DCT-4
    Replies: 14
    Last Post: 2nd January 2011, 12:16
  4. SECURITY_TEST failed - Read how to solve here
    By ichal in forum MxKey Dongle
    Replies: 5
    Last Post: 6th October 2010, 17:38
  5. help 6610 Failed to read SP data!
    By adambleketek in forum DCT-4
    Replies: 4
    Last Post: 13th December 2009, 01:30